fedi.cuf.fi

#qmx

Trying out QMX SSB this evening at WWFF ref.

spots.wwff.co/agenda

#qmx #wwff #ohff #ssb #hamradio #amateurradio

Reference info in text

Just playing with QRP labs radios today. Vertical MC-750, 3-4W and 20m got a good reach even the sun is throwing tantrums.

First time listened the QMX SSB and it sounds really nice!

#qrp #qrplabs #qmx #qcx #mc750 #chelegance #hamradio #amateurradio

This might be unpopular opinion but I think QMX firmware is irritating to use. get it many times into a state that it just doesn't respond to most of the buttons.

Also if the SWR is exceeded, there is no error or anything showing this on screen. Hans said that there should be, but there isn't.

And the loud POP sound when you start it up. It used to be worse but it's still horrible if using headphones. And I end up restarting it quite often as I get it to some weird state.

#qmx #qrplabs

I mocked up wannabe-KH1 handheld CW-tranceiver, with tuner and battery. The telescope antenna is 1.5m long.

Couldn't get any RBN to spot me but at least local KiwiSDR heard me on from inside house on 40m and 20m - no high hopes for QSOs still :)

Absolutely like this already! I think I can call this true QRP?

#qrp #hf #qmx #qrplabs #kh1

Radiotherapy in forest.

I like to go the nearby WWFF reference (OHFF-0201) and just make some QSOs. This time I set up my hammock and worked from that. @OG3E has named this activity "Hammocks-On-The-Air" = HOTA.

Worked 41 QSOs with QMX and a random wire. Bad propagation? Couldn't see that.

#wwff #hota #qmx #qrplabs #ohff #radiotherapy

Pedal powered activation to nearest spot from QTH to just "Play some radio".

QMX and less than 5W power to random wire and managed to work 29 QSOs on CW - exceeded my target by 28 QSOs.

#qmx #qrplabs #wwff

QMX, N6ARA key, random wire in nature

My QMX works!

After first try I had really bad SWR for all bands except 17m. I had checked all toroid solder with multimeter. I even went shopping and bought desoldering-iron and desoldered the trifiliar filter and checked wiring - didn't help. Same problem. I went through all solder points with really high heat and added new solder. Didn't help.

Then I started clipping all soldering ends with new thin clippers and touched all ends with soldering iron. And et voilá - all SWRs perfect!

#qmx

Build progress of QMX: all toroids and transformers build and soldered. Connectors soldered. Power boards soldered. So in short: QMX main board complete. Roughly 7 hours of work so far.

I have "few" thoughts about mechanical tolerances on this one also :)

12 fricking toroids / transformers to wind in total! Certainly not easier than QCX-mini. Oh why I decided to build this thing :D :D

Also: the nervous giggling during build: "I'm surprised if this thing actually works".

#qmx #qrplabs

I built myself QCX mini - which works fine - and I was looking QMX at QRP Labs pages - if I should buy QMX and build it.

Browsed through build instructions and got a really immediate "nope" reaction. For PA transformer alone there is separate build instructions to build single transformer!

Yet alone QCX mini was quite tedious to build and easy to make mistakes - so I'm pretty sure I don't have patience to build QMX without any mistakes.

#qrplabs #qmx