High Altitude Balloon launch this sunday from Hämeenlinna, Finland. Onboard venet, horus, aprs, meshtastic, meshcore. #hab #meshcore #meshtastic #venet #radioamateur https://oh3aa.fi/2026/06/25/oh3hab-9-stratosfaaripallolento-suunnitteilla-sunnuntaille-28-6-klo-15-16-vastaanota-kuvia-ja-telemetriaa-tai-seuraa-lentoa-netissa/
#meshtastic
Do you feel like your mesh firmware on Lilygo T-Deck is slow because of hardware?
It isn't. This is T-Deck running a realtime calculated dodecehedron with glenz filling. No video, all done on the hardware.
A very capable hardware if you do it right.
#meshtastic #lilygo #tdeck #esp32 #demoscene #glenz #dodecehedron
My solution to one string tree solar-repeateer for MeshCore. Solaros triangilum!
Three solar panels wired parallel - it doesn't matter which way sun is shining and this thing can recharge.
#meshcore #meshtastic #solarnode #solarpowered #solar #aurinkokenno #mesh #diy #electronics #hack
What has been bothering me a lot with Meshtastic is how much you have to fight against the system to get messages delivered.
It is amazing how much people spend time scratching their heads and trying to make connections in the endless randomness of the Meshtastic "smart" routing. Many think by adding nodes it gets better. After small amount of nodes nearby it doesn't, it gets worse.
When I tried MeshCore. I was just blown away how simple it is and how well MeshCore works.#meshtastic #meshcore
Good quality video about Meshcore and Meshtastic - why larger meshes are switching to Meshcore. Explains really well the technical challenge with Meshtastic on medium or large size meshes.
Meshtastic and Meshcore both avoiding the nasty 869.525 power meter transmissions here in Finland.
I uncontrollably geek out when I get access to hardware that has such a cool sensors available..
I'm writing DIY meshtastic software for Lilygo T-Pager which is just awesome in terms of available sensors and overall its a really nice device!
Check how much of data I can get from battery alone!
Really good video about Meshtastic devices vs mobile phones+bt nodes. Separate devices such T-Deck or T-Pager are the "halo" devices we need to show!
"Often when I show people Meshtastic and use mobile phone, people ask wasn't it supposed to be off-grid?"
Our local mesh is monitored by this kind of system. It gives quite interesting insights as one can "see" how packets are picked up in different parts of city. We are also having other views to the stream as well, like realtime map showing connections around the city etc.
The listening stations are using custom made firmware that uses Seed ESP32 SX1262 kit hardware - no Meshtastic normal node code involved. Currently four listener nodes are up and two more to come.
Our local Meshtastic network topology changed dramatically when one REALLY good node appeared on the mesh. It's running just a client role but it seems to "eat in" most of the traffic as so many nodes can have two way communication with it.
I don't know if this is a good thing because of the Meshtastic meshing rules.
I was writing my own Meshtastic firmware for Seeed T1000-E and I accidentally wrote over the flash based bootloader and SoftDevice. This meant some lovely dremel time as the only way to fix is by accessing the JTAG pads inside the device.
I published instructions how to save the poor tracker from permanent death: https://gist.github.com/j0uni/dbffc6b1e8ce36be618c7441a1a65192
#meshtastic #meshcore #sensecap #t1000 #t1000-e #seeedstudios
@acawley It is based on this idea: https://www.meshhubmids.com/edge.html
A bit more info also here: https://meshpirkanmaa.org/
Also this image probably shows more about the problem (the thick block is non-meshtastic traffic here in Tampere)
Our local Meshtastic network is moving to EdgeFastLow setting (EFL) because of the LongFast being almost useless. There is so much traffic from energy meters and some continuous Lorawan-traffic that packets are lost constantly.
Once we switched few nodes to EFL the change was dramatic. Suddenly all traffic was quick and trace-routes travelled many hops easily forth-and-back.
EFL is basically 62.5kHz bandwidth setting in the low portion of the allowed 868Mhz frequency range.
The issue was eventually fully deleted, see more here:
https://mastodon.radio/@cos@fosstodon.org/115338400755028541
It also contains the full deleted post up to it's deletion point.
Meshtastic iOS app breaks EU law with sending lots of telemetry (logs, usage) to DataDog in US wthout user consent and without any kind of notification of the app doing so.
I reported this as issue and it got immediately closed without any explanation: https://github.com/meshtastic/Meshtastic-Apple/issues/1449
I have 8 meshtastic devices now. One on order. What the earth has happened?
This is actually more fun than I thought. Social circles (meeting new people), hiding nodes in the trees, checking how our network is growing..
This is not about sending text messages at all! It's the everything else: people, devices, antennas, locations, building, re-aligning.. Just the fun & stupid we need in our lives!
Out city (Tampere) Meshtastic network has grown exponentially.
One rogue solar node was deployed today which opened the network quite a lot!
It's such fun to be part of this socially active and growing project!
"Suomalaiset Meshtastic-harrastajat löytyvät Matrixista Radiotekniikka -kanavalta. Kanava on sillattu IRCNetiin #radiotekniikka -kanavalle. "
@M0RVB Meshtastic doesn't solve any problem, it is just a gimmick and a toy. There is no need for it. And this explains why there is no traffic on it.
MeshCom is so close to LoRa APRS that I cannot find it's purpose either. Why we need a messaging system? Even APRS can do messaging it but hardly no-one uses it. So I really don't know why Yet Another APRS?
Don't take these questions personally, I'm just lost of the purpose of Meshtastic and MeshCom..
Find a higher ground, enjoy meshtastic sunset!?
I've still don't understand reason for Meshtastic - and I still don't - yet I'm walking around in park with radio and self built 868 Mhz antenna trying to find some nodes.
Lots of fuzz on Meshtastic. Then I installed it and took a spin and found out that is basically a SMS service over LoRa? Or am I getting something wrong here?
Probably you could hack the protocol and use it to transfer your own data.
Also the frequency / protocol thingie is a mess. What frequency and protocol I should use? It is hard to see from the map what frequency nodes are using - so no help there.
A bit messhy, I think :P Why the fuzz?










