Tamitha Skov predicted solar storm hitting earth between saturday - sunday.
Flux is high next week but new flares are probably launching so radio blackouts are also part of the show.
Tamitha Skov predicted solar storm hitting earth between saturday - sunday.
Flux is high next week but new flares are probably launching so radio blackouts are also part of the show.
What's wrong with the 40m band? No noise and everything can be heard crystal clear.
Summer has officially ended or ..?
- "Oh there you are! I was making few contacts with help of you today?"
- "We know. Now go and have some sleep and stop writing stupid toots!"
Usually I dislike social media Aurora Borealis photos but decided to do exception as I was making some aurora QSOs today. It was like seeing someone who was secretly helping you behind the visible light.
Taken from my back yard just minutes ago. The antennas are the ones I was using.
Could I have catched perseids flying also? Not an aeroplane ..
"Arctic Radio 252 kHz LW
The world‘s first new LW station this Millennium!"
"Based in Finland with programming intended to be heard across the Arctic region and aims to start testing in September."
Last 24h average WPM speed from RBN. Probably higher because of WAE competition. Most are in 25..35 WPM range.
I don't understand the rush in CW contest. Why work at 30-40 WPM if you have to constantly repeat RST + serial to the other stations?
Today I heard several QSOs where the CQ station repeat 10-20 times RST + serial and the other station replied "R". Sounded very silly. Wouldnät slower speed would increase the possibility to receive at once?
I believe high speeds cuts down potential new comers or operators with slower speed skills. More QSOs for everyone?
@ejo60 Very interesting graph! Self generated / publicly available?
@ejo60 Hyvää huomenta! :)
@DC4DD It has been doing that for a long time. Google does the same. They are basically breaking SMTP which has worked beautifully for 30 years and more.
My theory is that they are trying to turn people to their service because those "work better".
Also had chat with M0TNX on http://www.on4kst.com/chat/start.php - that seems a bit odd ball of chat as it seems there are lot of people and it's completely custom software ran by ON4KST.
Worked M0TNX on 6 meters Es with CW. Distance 1771km.
One QSO is enough to feed my FOMO for this opening and go to sleep :)
@pg4i Thanks for the QSO! I can see my call on the logbook - so cool!
What a bless to finally work some QSOs with self built QMX on a sunny day.
I was sitting in scorching sun and hunted few WWFF parks, especially few Mastodon - HAMs on air! :)
I was using my DIY random wire in suburban area (so a lot of QRM) - I was blown away that the stations could even hear me. Also RBN spotted me quite largely on Europe area.
This was just what @swling allways tells us to do : play some radio. I did. It was so fun!
After dragging around Icom 705 I have wished for really small portable kit.
Now it starts to take shape as I finished QMX. ATU 10 tuner hides behind QMX. Maybe if I wouldn't use random wire I wouldn't need tuner. As I want to try out all bands QMX offers, I think having tuner in the kit is fine for now.
Maybe I will replace earphones with earbuds. And I need to get thinner BNC-BNC coax.
More on QMX:
My build time was total about 9 hours. Then debugging / desoldering / soldering took maybe 2h. I consider myself quite a fast builder and I really wanted to just finish this.
Tips: Make a fixture out of pencil for winding. Helps a ton. The wire lengths in manual are maximum, no need to add extra. Wind most of the wire, then count the windings. Use lead solder and LOTS of heat.
If you aren't in rush: just buy pre-built. 50$ is peanuts for this build :D
Thumbs up for QRP Labs!
My QMX works!
After first try I had really bad SWR for all bands except 17m. I had checked all toroid solder with multimeter. I even went shopping and bought desoldering-iron and desoldered the trifiliar filter and checked wiring - didn't help. Same problem. I went through all solder points with really high heat and added new solder. Didn't help.
Then I started clipping all soldering ends with new thin clippers and touched all ends with soldering iron. And et voilá - all SWRs perfect!
Build progress of QMX: all toroids and transformers build and soldered. Connectors soldered. Power boards soldered. So in short: QMX main board complete. Roughly 7 hours of work so far.
I have "few" thoughts about mechanical tolerances on this one also :)
12 fricking toroids / transformers to wind in total! Certainly not easier than QCX-mini. Oh why I decided to build this thing :D :D
Also: the nervous giggling during build: "I'm surprised if this thing actually works".
I'm running DIY spectrogram / waterfall plotter for 40m. Fun to see how the noise of sun turns into competition on CW band!
The plot is roughly from 13.00 UTC to 18.30 UTC.
@oh3cuf@fedi.cuf.fi: search for this handle in your app to follow.
1584 posts · 268 followers · 92 following